宜昌小学网站建设接单平台app
用Arduino IDE为ESP32-C3编程
- 概述
- ESP32-C3的FLASH连接
- Arduino编程选项FLASH的QIO和DIO
- 总结
概述
买了CORE-ESP32-C3实验板，用Arduino IDE为板子编程。板子如下：
编程出现问题，串口打印输出：
13:56:22.927 -> E (25) boot: load partition table error!
13:56:22.974 -> E (25) flash_parts: partition 0 invalid magic number 0xecef
13:56:22.974 -> E (25) boot: Failed to verify partition table
13:56:22.974 -> E (25) boot: load partition table error!
13:56:22.974 -> E (25) flash_parts: partition 0 invalid magic number 0xecef
13:56:22.974 -> E (25) boot: Failed to verify partition table
13:56:23.019 -> E (25) boot: load partition table error!
13:56:23.019 -> E (25) flash_parts: partition 0 invalid magic number 0xecef
13:56:23.019 -> E (25) boot: Failed to verify partition table
13:56:23.019 -> E (25) boot: load partition table error!
估计是Flash